- Pet diabetes prescription foodSeeedstudio reServer J2032 Edge AI Server w/ Jetson Xavier NX 16GB

Title Default Title
Qty:

Description

  • Seeedstudio reServer J2032 Edge AI Server w/ Jetson Xavier NX 16GB
  • Powered by the NVIDIA Jetson NX 16GB
  • Offers a powerful inference server on the edge to the cloud
  • Provides a high-speed 2.5-Gigabit Ethernet port
  • Equipped with a quiet cooling bottom fan
  • Supports hybrid connectivity including 4G/5G

The Seeedstudio reServer J2032 Edge AI Server w/ Jetson Xavier NX 16GB is a powerful inference server on the edge powered by Jetson Xavier NX 16GB, which delivers up to 21 TOPs AI performance. It provides a high-speed 2.5-Gigabit Ethernet port and supports hybrid connectivity including 4G/5G, Long Range. reServer for Jetson with pre-installed Jetpack, 256GB SSD, reServer is able to equip up to two 3.5 inches SATA internal hard disk drives or two 2.5 inches SATA internal hard disk drives to acquire more storage.

reServer for Jetson, as a milestone product of reThings Jetson family, is extremely compact and powerful. This smart tiny server is able to work easily and efficiently from the edge to the cloud. This smart tiny server is able to work easily and efficiently from the edge to the cloud. reServer comes with 2 Ethernet ports: 2.5GbE port x1 (RX: 2.35 Gbits/sec, TX: 1.4 ~ 1.6 Gbits/sec), 1GbE port x1.

View more

  • 1x NVIDIA Jetson Xavier NX 16GB
  • 1x Carrier Board
  • 1x Pre-stalled 2.5 inch 256GB SSD
  • 1x RTC Battery
  • 1x Aluminum Heatsink Cooling Fan
  • 1x Bottom Fan
  • 1x Aluminum Case
  • 1x 12V/5A Power Adapter (without AC Power Cord)
  • 1x User Manual
  • 1x Screwdriver

PDF File

Processor

  • Module: NVIDIA Jetson Xavier NX 16GB
  • AI Perf: 21 TOPS
  • GPU: NVIDIA Volta architecture with 384 NVIDIA CUDA cores and 48 Tensor cores
  • CPU: 6-core NVIDIA Carmel ARM v8.2 64-bit CPU 6 MB L2 + 4 MB L3
  • DL Accelerator: 2x NVDLA Engines
  • Vision Accelerator: 7-Way VLIW Vision Processor
  • Memory: 8 GB 128-bit LPDDR4x 51.2GB/s
  • Storage: 16 GB eMMC 5.1
  • Video Encoder: 2x 4K60 | 4x 4K30 | 10x 1080p60 | 22x 1080p30 (H.265) | 2x 4K60 | 4x 4K30 | 10x 1080p60 | 20x 1080p30 (H.264)
  • Video Decoder: 2x 8K30 | 6x 4K60 | 12x 4K30 | 22x 1080p60 | 44x 1080p30 (H.265) | 2x 4K60 | 6x 4K30 | 10x 1080p60 | 22x 1080p30 (H.264)
  • Storage: Support 2 x 2.5''/3.5" SATA (HDD/SSD), up to SATA3 ( 2.5 inches 256GB SSD x1, up to SATA3 already installed)
  • Co-processor: Raspberry Pi RP2040 32-Bit Dual ARM Cortex-M0+ 133MHz

External I/O

  • 2.5G Ethernet Port: Converted from PCIe RX: 2.35 Gbits/sec | TX: 1.4 ~ 1.6 Gbits/sec
  • 1000M Ethernet Port: Native Ethernet interface of Jetson Xavier NX
  • HDMI Interface: Support up to HDMI2.0
  • DisplayPort Interface: Support up to DP1.4
  • USB3.1 GNE2 Interface x2: Support up to 10Gbit
  • DC Jack Power Interface: DC 12V 5A, 2.5mm center pin

Internal I/O

  • M.2 KEY B Connector: With USB3.2 GEN2, Support 5G/4G wireless module
  • MiNi-PCIe Connector: Support LoRa/Series wireless module
  • SIM Card Slot: Top layer for MiNi-PCIe | Bottom layer for M.2
  • SATA Power Connector x2: Support 2.5inch or 3.5inch HDD/SSD, up to SATA3
  • SATA Data Connector x2: Support 2.5inch or 3.5inch HDD/SSD, up to SATA3
  • Main Fan Connector: For enclosure fan, only supports 12V fans, the bottom fan is already installed
  • Jetson Xavier NX Fan Connector: Only supports 5V fans, aluminium heatsink cooling fan already installed
  • RTC Battery Connector: RTC battery already installed
  • 260Pin SODIMM Connector: For Jetson Xavier NX
  • USB TYPE-C Connector for NX: For NX programming
  • USB TYPE-C Connector for Coprocessor: For coprocessor firmware upgrade
  • AutoPower on Header: Short-circuit to enter key-on mode, float into the auto power-on mode
  • 2x5Pin Debug Header: Debug
  • Power Button: With green LED
  • Active Buzzer: Yes

Network

  • Giga Ethernet: 2.5G Ethernet Port - rx: 2.35 Gbits/sec | tx: 1.4 ~ 1.6 Gbits/sec | 1000M Ethernet Port
  • Wireless Connection: M.2 KEY B connector, support 5G/4G wireless module | MiNi-PCIe connector, support LoRa/Series wireless module

Display

  • LED1: SATA0 statusLED
  • LED2: SATA1 statusLED
  • LED3: M.2 wireless module status LED

Power

  • DC Jack Power interface: DC 12V 5A, 2.5mm center pin
  • Power Button: Power on
  • Restart Button: Restart

Pre-installed

  • 2.5 inch 256GB SSD x1, up to SATA3
  • Aluminum Heatsink Cooling Fan
  • RTC Battery
  • Bottom Fan